Changelog for package dbw_mkz_can
1.4.1 (2021-09-20)
- Bump firmware versions
- Add reserved bits
- Improve printing of license info
- Add ignition status to ThrottleInfoReport
- Add user control of alert
- Contributors: Kevin Hallenbeck
1.4.0 (2021-05-12)
- Bump firmware versions
- C++17 and std::clamp()
- Remove ROS Kinetic support
- Populate brake/throttle/steering command values even if enable is false
- Fix socketcan error frame lock up
- Contributors: Kevin Hallenbeck, Robert Maupin
1.3.2 (2021-03-09)
- Bump firmware versions
- License multiple features individually
- Add option to use socketcan hardware
- Add Ford Edge platform
- Contributors: Kevin Hallenbeck
1.3.1 (2021-01-14)
- Bump firmware versions
- Contributors: Kevin Hallenbeck
1.3.0 (2020-11-18)
- Add brake pedal actuator brake type
- Add Ford Ranger platform
- Add reserved bit to prevent warnings
- Add battery current measurement
- Contributors: Kevin Hallenbeck, Sun Hwang
1.2.11 (2020-08-17)
- Bump firmware versions
- Contributors: Kevin Hallenbeck
1.2.10 (2020-08-05)
- Only publish joint states from DbwNode if set to load URDF model
The joint states messages from DbwNode collide with the joint states published by the Gazebo simulator otherwise.
- Change names of joints to be different from links
Gazebo 11 doesn't let joint names and link names be the same, which was allowed in earlier versions
- Contributors: Kevin Hallenbeck, Micho Radovnikovich
1.2.8 (2020-02-20)
- Update firmware versions
- Contributors: Kevin Hallenbeck
1.2.7 (2020-02-14)
- Update firmware versions
- Report NAN for signals that are unavailable/faulted
- Use fewer function calls to setup message sync
- Add Lincoln Aviator to list of platforms
- Contributors: Kevin Hallenbeck
1.2.6 (2019-11-11)
1.2.5 (2019-10-30)
- Add steering wheel buttons in Misc1Report
- Contributors: Kevin Hallenbeck, Sun Hwang
1.2.4 (2019-09-13)
- Added argument to enable/disable CAN message filtering on DBW message range
- Contributors: Kevin Hallenbeck
1.2.3 (2019-08-13)
- Updated firmware versions
- Updated website maintenance link
- Contributors: Kevin Hallenbeck
1.2.2 (2019-07-24)
- Extend licensing to each module
- Contributors: Kevin Hallenbeck, Sun Hwang
1.2.1 (2019-07-11)
- Updated firmware versions
- Added support for non-hybrid brake report values
- Added gear number to throttle info message
- Added throttle and brake limp-home statuses
- Contributors: Kevin Hallenbeck, Sun Hwang
1.2.0 (2019-05-03)
- Added angle/torque steering command modes (not supported on all platforms)
- Added warnings for unknown and unsupported command types
- Added support for firmware change that uses SVEL resolution of 4 deg/s
- Added FORD_C1 platform
- Added script to estimate the number of wheel counts per killometer
- Added odometer and battery voltage to fuel level report
- Added casts to force single precision floating point math
- Contributors: Kevin Hallenbeck
1.1.2 (2019-03-14)
1.1.1 (2019-03-01)
- Updated firmware versions
- Refactored tcpNoDelay() for subscribers
- Added missing tests for PlatformVersion.h
- Contributors: Kevin Hallenbeck
1.1.0 (2018-11-30)
- Updated firmware versions
- Removed all BOO control options and manually implemented auto BOO control for legacy firmware (brake lights)
- Added BTYPE (brake type) bit
- Added CMD_DECEL brake command type (only for non-hybrid platforms)
- Replaced dbw_mkz_twist_controller with dataspeed_ulc_can in dbw.launch
- Added throttlePercentFromPedal lookup table function and corresponding test
- Use the ${catkin_EXPORTED_TARGETS} macro for target dependencies
- Added DriverAssistReport message
- Contributors: Kevin Hallenbeck, Micho Radovnikovich
1.0.17 (2018-10-27)
- Updated firmware versions
- Updated list of platforms
- Disengage on any fault for brake/throttle/steering (change AND to OR)
- Added outside air temperature to Misc1Report
- Latch firmware version on any change (previously only latched once)
- Changed pedal_luts default from true to false (forward command type by default now)
- Fixed handling of all the firmware/module requrements for brake command type CMD_TORQUE_RQ
- Disregard overrides on unused subsystems using the TIMEOUT bit
- Fixed typo in nodelets.xml of dbw_mkz_can
- Finished unit tests of PlatformMap
- Use sign of wheel speeds to set sign of vehicle speed, fixes issue #24
- Set CXX_STANDARD to C++11 only when necessary
- Contributors: Kevin Hallenbeck, Micho Radovnikovich
1.0.16 (2018-08-29)
- Force compiler to use C++11
- Handle version message with a map/database of several platform/module combinations
- Implemented firmware version requirements for forwarding pedal command type
- Contributors: Kevin Hallenbeck
1.0.15 (2018-08-21)
- Updated firmware versions
- Contributors: Kevin Hallenbeck
1.0.14 (2018-08-20)
- Updated firmware versions
- Enabled code coverage testing when built as debug
- Increased the steering command range to +-INT16_MAX, the specific range limit is applied by the firmware
- Skip warning about brake and throttle commands when the reserved bit is set
- Match CAN messages 0x060 to 0x07F even though some are unused
- Capitalized the COUNT field to match code style
- Added parameter for local/embedded pedal LUTs
- Added option to forward higher level pedal commands (percent/torque) to the embedded modules
- Added unit tests for exported header files
- Extracted sonar color to a separate function
- Added missing include
- Contributors: Kevin Hallenbeck
1.0.13 (2018-06-06)
- Updated firmware versions
- Added option to enable/disable warnings on received command messages
- Added support for the RES+ and RES- buttons
- Added explicit casts to float
- Added firmware version of separate shifting module
- Contributors: Kevin Hallenbeck
1.0.12 (2018-01-30)
- Updated firmware versions
- Moved ModuleVersion class and look-up-tables to exported header files (for use by other packages)
- Added power fault bit to report when modules lose power
- Added missing warning about steering fault preventing enable
- Added roslaunch argument to set use_sim_time or not
- Added roslaunch tests
- Only warn once for each unknown module version
- Contributors: Kevin Hallenbeck
1.0.11 (2017-10-19)
- Updated firmware versions
- Added missing dependencies
- Contributors: Kevin Hallenbeck
1.0.10 (2017-10-03)
- Updated steering firmware version
- Renamed feature name
- Contributors: Kevin Hallenbeck
1.0.9 (2017-09-19)
- Added warning to update old firmware
- Added link to request a license
- Added more detail to fault warnings
- Contributors: Kevin Hallenbeck
1.0.8 (2017-09-07)
- Migrated from dataspeed_can_msgs to can_msgs
- Contributors: Kevin Hallenbeck
1.0.7 (2017-08-21)
- Removed steering report driver activity bit
- Replaced connector fault with timeout, and warn on timeout
- Keep track of module firmware versions
- Added gear rejection enumeration to gear report
- Added licensing and VIN
- Added wheel positions report (replaces suspension report)
- Added option to use buttons for enable/disable, or not
- Added enable button combination for Mondeo without ACC (set_dec and cc_res)
- Added steering wheel left D-Pad buttons
- Updated ackermann steering parameters (including steering ratio)
- Prioritize the local include folder (there were issues with catkin workspace overlays)
- Fixed accel orientation to match the ROS standard
- Contributors: Kevin Hallenbeck, Micho Radovnikovich
1.0.6 (2017-06-21)
- Added frame_id parameter for IMU and Twist messages
- Properly handle IMU unknown covariance and fields that are not present
- Removed SuspensionReport (data was unintelligible)
- Reorganized launch files.
- Swapped lateral and longitudinal acceleration in IMU message.
- Export dispatch.h for use by other packages
- Added clear bit to command messages
- Updated nodelet to the PLUGINLIB_EXPORT_CLASS macro
- Additional dependencies
- Contributors: Kevin Hallenbeck, Micho Radovnikovich
1.0.5 (2017-04-25)
- Updated package.xml format to version 2
- Unique target names
- Contributors: Kevin Hallenbeck
1.0.4 (2016-12-06)
- Added brake and throttle thrashing scripts to try and induce faults
- Changed wheel speeds to signed values
- Contributors: Kevin Hallenbeck, Joshua Whitley
1.0.3 (2016-11-17)
- Added QUIET bit to disable driver override audible warning
- Print brake/throttle/steering firmware versions
- Handle and report steering faults (FLTBUS1 and FLTBUS2)
- Contributors: Kevin Hallenbeck
1.0.2 (2016-11-07)
- Configurable steering ratio
- Contributors: Kevin Hallenbeck
1.0.1 (2016-10-10)
- Added support for apt-get binary packages
- Added twist message computed from vehicle speed and steering wheel angle.
- Contributors: Kevin Hallenbeck
1.0.0 (2016-09-28)
- Initial release
- Contributors: Kevin Hallenbeck, Micho Radovnikovich