0.1.10 (2022-01-16)

• Add missing "xacro:" infront of "include"
• Contributors: Joey Yang

0.1.9 (2021-07-16)

0.1.8 (2021-05-11)

0.1.7 (2021-03-08)

• Add env var support for VLP-16 (#10) * Add support for the VLP16 as a standard laser sensor on this platform * Add vlp16 to the comment block explaining supported laser scanners * Add the 3D and secondary 2D lidars
• Contributors: Chris I-B

0.1.6 (2020-11-26)

0.1.5 (2020-10-30)

• Fix the mount links for Dingo-D and Dingo-O; -D doesn't technically have a mid_mount (#9)
• Contributors: Chris I-B

0.1.4 (2020-10-26)

• [dingo_description] Switched description.launch to use single Dingo URDF which then determines which file should be loaded.
• Add a generic dingo.urdf.xacro (#8) * Add a generic dingo.urdf.xacro which will include dingo-d or dingo-o as-needed. This simplifies adding support for manipulators to the robot
• Contributors: Chris I-B, Tony Baltovski

0.1.3 (2020-09-29)

0.1.2 (2020-09-25)

0.1.1 (2020-09-14)

• Disable gravity on the L515 links; they were causing the odom frame to drift in gazebo
• Nav improvements (#5) * Expose the scan_topic argument in the gmapping_demo and amcl_demo launch files * Add placeholder support for the RS L515 and D455 so that the gazebo plugins work; the meshes for these sensors don't exist yet, but we can at least get the plugin configured & add the appropriate links for now * Refactor the RealSense macro to put the mesh + gazebo plugin in one place. Create a more-accurate L515 mesh out of cylinders until Intel releases an official mesh for the sensor
• Fix missing quotes around the lidar models
• Model Update (#3) * Make the yellow of the chassis more yellow and less orange * Fix the spawn position of the Hokuyo lidar & its focal point. Add the STLs for the LMS-1xx & Hokuyo lidars. Add lms1xx as a dependency so that the lidar macro is available. * Add additional mounting points for accessories, fix the position of the existing front_mount * Start adding support for the Intel RealSense cameras as out-of-the-box accessories * Update the dependencies * Remove the hector gazebo plugin dependency; it's included in dingo_gazebo, and isn't strictly needed in the description package * Refactor the lidar accessory variables, add clarifying comments to make it easier to find supported values for the sensor models * Fix the measurements. Keep the front/rear mounts 5cm back from the bumpers, move the bumper mounts to the center of the bumper * Remove the rear_bumper_mount since that's where the HMI is, which would prevent anything from being reasonably mounted there
• [dingo_description] Switched to find over dirname since it was causing errors in tests.
• Fix the spawn position of the Hokuyo lidar & its focal point. Add the STLs for the LMS-1xx & Hokuyo lidars. Add lms1xx as a dependency so that the lidar macro is available.
• Contributors: Chris I-B, Chris Iverach-Brereton, Tony Baltovski

0.1.0 (2020-08-10)

• Unified Dingo folders/files as much as possible, updated meshes, bumped CMake version and made roslaunch a test depend.
• Added dingo_control; split dingo_description into separate Dingo-D and Dingo-O flavours; still much work to be done here, but preparing hand-off for Tony
• Moved IMU
• Updated joint names for simplicity
• Fixed collision
• Added description
• Contributors: Dave Niewinski, Jason Higgins, Tony Baltovski